corecool

CUSTOM JET COOLING TECHNOLOGY FOR THE Die Casting INDUSTRY

what is jet cooling?

What is jet cooling? Complex part geometry causes thin die features or thick casting masses that create areas of excessive heat. These areas require jet cooling. Our CoreCool technology utilizes high-pressure water injected into small diameter fountains to provide precise thermal control of the problem areas. 

CoreCool extends the life of INDUSTRIAL die CASTING COMPONENTs and reduces die maintenance.

diepro corecool open loop 2
die pro usa

CAST FASTER, CAST STRONGER  

Some of the most complex and challenging casting issues arise from temper control issues. Soldering, Shrink Porosity, and Leaks, are sometimes difficult to solve. Our CoreCool systems simplify these issues and help you achieve a higher quality product at faster cycle times and higher precision and consistency.

corecool provides JET COOLING solutions for:

Porosity –  This is found when there are small voids, holes, or pockets of air that are found within the metal.

Shrinkage – Caused by different solidification rates within the casting. 

Soldering – Soldering occurs during die casting process when molten aluminum “welds” to the die surface, resulting in damage to the die and in poor surface quality of the casting.

Leakers – Any area in the casting that has a poorly fused microstructure and won’t hold pressure. 

CoreCool addresses all of these defects by precise internal cooling of INDUSTRIAL die CASTING COMPONENTS. resultING in a more densely fused microstructure.

CORECOOL JET COOLING 3.3 CLOSED LOOP COOLING SYSTEM FOR DIE CASTING

CoreCool cutout

CLOSED-LOOP JET COOLING FOR HIGH PRESSURE DIE CASTING

The CoreCool System provides fully automatic control of die cooling by delivering pressurized water to exact locations utilizing small high flow bubblers. The exact amount of cooling is achieved and maintained by setting the desired pressure and cooling rates at the operator control panel.

  • PLC CONTROLLED COOLING SYSTEM
  • SELF CONTAINED WATER COOLING SYSTEM
  • ULTRAPURE DI CARTRIDGE WATER PURIFICATION SYSTEM
  • COOLING WATER DISCHARGE PRESSURES UP TO 325 -450 PSI (22-31 BAR)
  • FLOW AND PRESSURE RATE PROCESS MONITORING SYSTEM
  • AIR DECAY LEAK TEST AFTER EACH COOLING CYCLE
CoreCool cutout

did you know? OUR ULTRAPURE SYSTEM SOLVES DIE CASTING PROCESS WATER ISSUES

WITH OUR CORECOOL SYSTEMS YOU HAVE TOTAL DIE CASTING CONTROL

Our new closed loop CORECOOL model has built-in ULTRAPURE technology that solves calcium scale build-up from poor water quality.

diepro logo alt wht icon
cleancool2cleancool1

CORECOOL JET COOLING 3.3 CLOSED LOOP COOLING SYSTEM FOR DIE CASTING specs

diepro corecool specs
conformacool whtlogo

MANAGE 3D PRINTED DIE FEATURES WITH the CONFORMACOOL upgrade

In today’s additive manufacturing environment, our ConformaCool technology manages the cooling circuit of 3d printed die features while at the same time managing your jet cooling circuits.

In today’s additive manufacturing environment, our ConformalCool technology manages the cooling circuit of 3d printed die features.

3dDie2

corecool jet coolING open loop COOLING SYSTEM FOR DIE CASTING

OPEN-LOOP jet cool systems

The CoreCool System provides fully automatic control of die cooling by delivering pressurized water to exact locations utilizing small high flow bubblers. The exact amount of cooling is achieved and maintained by setting the desired pressure and cooling rates at the operator control panel.

  • PLC CONTROLLED COOLING SYSTEM
  • SELF CONTAINED WATER COOLING SYSTEM
  • COOLING WATER DISCHARGE PRESSURES UP TO 325 PSI (22 BAR)
  • FLOW AND PRESSURE RATE PROCESS MONITORING SYSTEM
  • AIR DECAY LEAK TEST AFTER EACH COOLING CYCLE
diepro corecool open loop 2

corecool jet coolING open loop COOLING SYSTEM FOR DIE CASTING specs

DIE PRO MULTI DOC 3